The Luxury Sauna Barrel fit up to 7-8 people and measures a full 30 cm larger in diameter than our classic barrel saunas (1.9 m diameter). A roof of the sauna is be made of bitumen shingles (black, red or green) or it can be made from wooden shingles. An overall height including the roof is 2.4 m. The roofing edges are lower than in standard sauna barrel design.
Timber. This Luxury sauna barrel is made from thermowood. Thermowood is a natural and renewable resource for construction, but has greater stability and resistance to rot making it a far more dependable product. Sauna benches and modern looking solid back rests are made from deciduous wood (legs made from larch). Deciduous wood - linden (aspen or alder wood are also available). The floor of sauna is made from larch. Thickness of sauna barrel walls is 38 mm. Thickness of the a solid wood flooring is 18 mm.
Heating. We prepared recommendations for available sauna heaters according to the size of the sauna room and the ratio of the heaters. There are available electric and wood burning heaters: Electric heaters for sauna without terrace: Harvia Vega BC80, 8kW (7-12 m3) / Harvia Trendi KIP90, 9kw (8 -14 m3) / Harvi Globe GL110, 10,5 kw ( 9-15,m3) / Harvia "Club",13,5 kw (11-20 m3) / Harvia "Elegance" F16.5, 16,5 kw (9-18m3). Electric heaters for sauna with terrace: Harvia Vega BC80, 8kW (7-12 m3) / Harvia Trendi KIP90, 9kw (8 -14 m3) / Harvi Globe GL110, 10,5 kw ( 9-15,m3) / Harvia "Elegance" F16.5, 16,5 kw (9-18m3). Wood burning heaters for sauna without terrace: Harvia M3, 16.5 kw (6-13 m3) / Harvia Pro 20, 24 kw (8-20 m3) / Harvia M3 SL (outside firewood feeding), 16,5 kw (6-13 m3) / Harvia SL 20 (outside firewood feeding), 24,1 kw (8-20 m3) / Harvia 26 Pro, 26,6 kw (10 - 26 m3). Wood burning heaters for sauna with terrace: Harvia M3, 16.5 kw (6-13 m3) / Harvia Pro 20, 24 kw (8-20 m3) / Harvia M3 SL (outside firewood feeding), 16,5 kw (6-13 m3) / Harvia SL 20 (outside firewood feeding), 24,1 kw (8-20 m3). You are free to choose heaters design.
LED lights provides a cozy combination. The sauna is equipped with a LED lights. 7 meters of LED strips are used on the outside of the sauna: 2 meters on the sides of the sauna, under the roof edge, and 1.5 meters on the sides of the front door. 8 meters of LED are used inside of the sauna: on both sides of the sauna under the benches there are 2 meters of LED lights, also LED lighting is fitted under the back supports (2 meters on each side). Upon customer's request, we can install a wood-fired furnace or an electric heater in the barrel sauna.
- Standard set
- Heater and Chimney Kit
- Usage and Maintenance
|Room||One Room inside|
|External dimension||2240 x 3060mm|
|Door size||600 x 1900mm|
|Window size||213 x 665mm|
|Terrace||Available 0.6 m terracemm|
|Sauna Barrel frame from thermo wood;|
|Full glass window in the back wall;|
|Door with a lock and a rectangle tempered glass window;|
|2 opening windows in the front wall, on the sides of the door;|
|2 sauna benches from deciduous wood (legs made from larch);|
|Modern looking and solid back rests from deciduous wood;|
|The roofing edges are lower than in standard sauna barrel design;|
|The sauna floor is made from larch;|
|Heat-resistant plates for the heater/stove;|
|3 (without terrace) or 4 (with terrace) stainless steel tightening bands;|
|7 meters of LED strips are used on the outside of the sauna and 8 meters inside sauna;|
|This sauna goes to customer fully assembled, painted in white and black, in a complete set.|
|Size of pallets (LxWxH)||3.1 x 1.2 x 1.3m|
The Luxury Sauna Barrel is delivered to a customer fully assembled.
*Comment: sauna barrels with the glass back wall are delivered only fully assembled.
It is very important to have a proper foundation for your Luxury Sauna Barrel. Therefore we recommend making the foundation according to the sketches here. First of all, foundation must be prepared according to the landscape and ground conditions. Consult a qualified builder or an engineer to prepare a proper foundation, which fits your location. Make sure to complete the site preparation and the foundation before unpacking and assembling the Sauna.
USING YOUR SAUNA
PREPARING YOUR SAUNA FOR USE.
- If you have wood burning heater, make sure to remove the protective film of the heater chimney before heating.
- Check the Sauna before heating. No flammable objects must be left on or near the heater.
- Check that there is water in the water tank (if you are using it).
- Ensure that the Sauna door is unlocked and easy to open before using it. If necessary, sauna door must be adjusted by the customer.
- Do not mount any additional accessories or shelves above the heater.
- Turn the Sauna heater on.
- The thermometer should be located at head level in the Sauna. It should be further away from the heater, so it does not give a false reading.
- Wait for the Sauna to reach the required temperature (normally 80-90º C).
All users should be aware of the potential dangers and requirements prior to participation in the Sauna!
THINGS TO NOTE WHEN USING THE SAUNA
Enjoy the many health benefits of the relaxing heat of your Sauna. But remember: being inside the hot Sauna for long periods of time raises your body temperature, which may be dangerous, especially for those with a heart condition or other health risks. Generally, the
recommended time inside a Sauna is from 10 to 15 minutes. After a period of heating, take a 5 minute break and then repeat. Also:
- Familiarize yourself with the safety instructions and keep away from the heater when it is hot.
- Be very careful when moving in the Sauna, as the benches and floors may be slippery!
- The Sauna should not be used by pregnant women or very young children.
- Remove all jewelry before entering the hot Sauna.
Wood is a natural material and can change through time. Cracks of various sizes, structural or color changes are not the defects – rather, they are features of the wood. Natural wood (not impregnated) becomes grayish after being left untouched for a while. Later it can turn
blue and get covered with mold.
- Impregnate and paint the wood to protect the product from outside. We recommend to inspect Sauna every 6 month and evaluate need of re-impregnation, re-painintg.
- When not in use, keep a bucket full of water in the Sauna during summer.
- Doors of the Sauna must be adjusted regulary.
- You should keep the sauna ventilation open all the time, to allow it time to dry and air out to avoid mold.
- To remove bench stains, use a mild soapy water and a soft cotton cloth. This can also be used on the heater itself - just make sure it's off and completely cool when you clean it.
- Don't use harsh or abrasive chemicals on benches, as these can bleach and warp the wood, ruining the grain and turning it grey.
With these simple maintenance tips your Sauna will stay inviting, fresh, and enjoyable!